Polymate Additives Co., Limited
Add: 206Shi, 101Dong, Huaqiaocheng
Pukou, Nanjing, China, 210031
Tel: +86 (0)25 570 11575
Fax: +86 (0)25 570 16494
Email: polymateadditives@gmail.com
Web: www.PolymateAdditives.com
  Phenolic Antioxidants
Plaox-1010, Plaox-1076, Plaox-1098
Plaox-1024, Plaox-3114
Organophosphite Antioxidants
  Plaox-168, Plaox-626
  Amine Antioxidants
  Plaox-BODPA, Plaox-DNDPA
Plaox-DODPA, Plaox-DCDPA
  Thioester Antioxidants
  Plaox-DLTDP, Plaox-DSTDP
  Blended Antioxidants
  Plaox-B215, Plaox-B225
  Heat stabilizers
  Pherst-TPP, Pherst-ODPP
Light stabilizers
HALS (hindered amine light stabilizers)
  Palst-770, Palst-622, Palst-944
Palst-783, Palst-791
, Palst-3529
  UVA (Ultraviolet absorbents)

Pamsorb-531, Pamsorb-P
Pamsorb-234, Pamsorb-326
Pamsorb-327, Pamsorb-328
Pamsorb-1164, Pamsorb-1577

Flame retardants
Brominated Flame retardants

Plamtar-TBBA, Plamtar-BDDP
Plamtar-DBDPE, Plamtar-BTBPOE
Plamtar-HBCD, Plamtar-TTBPC

  Halogen free Flame retardants
  Plamtar-RDP, Plamtar-BDP
Plamtar-DOPO, Plamtar-DOPO-HQ
About us | Products | Service | Contact us   
    Phenolic Antioxidants    
    Plaox-1010 | Plaox-1076 | Plaox-1098 | Plaox-1024 | Plaox-3114    
    Antioxidant Plaox-1076    

Chemical name: n-Octadecyl- -(4-hydroxy-3,5-di-tert-butyl-phenyl )-propionate
Equivalent: Irganox 1076 ( Ciba SC )/ Anox PP18 (Chemtura)
Molecular formula: C35H62O3
Molecular weight: 531
CAS No.: 2082-79-3
Structural formula:

Physical properties
Appearance: White powder or granules
Melting range: 50 ~ 55 C
Flash point: 273 C
Bulk density (g/cm3 ): 0.3 ~ 0.5

Solubility (g/ 100g solvent), @20 C

Water: <0.01
Benzene: 57
Acetone: 19

Chloroform : 57
Toluene: 0.6
Alcohol: 1.5



Appearance: White powder or granules
Melting point: 50.0 ~ 55.0 C
Volatile: 0.5% max
Ash: 0.1% max

Transmittance (425nm): 98.0% min
Transmittance (500nm): 99.0% min
Clarity test: Clear
Assay: 98.0% min

Plaox-1076, with good synergistic of Plaox-168, Plaox-DLTDP, can retard heated degradation and oxidative degradation of polymer substances during processing and in end application. It can be widely used for PE, PP, POM, ABS resin and other compound resin, compound rubber and petrochemical products. The dosage is recommended to be 0.1 ~ 0.5 phr.




Organophosphite Antioxidants
Plaox-168 | Plaox-626
Amine Antioxidants
Plaox-BODPA | Plaox-DNDPA | Plaox-DODPA | Plaox-DCDPA
Thioester Antioxidants
Plaox-DLTDP | Plaox-DSTDP
Blended Antioxidants
Plaox-B215 | Plaox-B225

Copyright 1996 ~2009 by Polymate Additives Co., Limited All rights reserved